Kaco

Kaco Blueplanet 5.0 NX1 M2 Solar inverter Blueplanet5.0NX1M2

€737.73

Kaco Blueplanet 5.0 NX1 M2 Solar inverter Blueplanet5.0NX1M2

The transformerosis, 1-phase inverter shines primarily through the particularly simple design, commissioning and operation. Above all, it is intended for small, private PV systems on single and two-family houses and can be used both indoors and outdoors.

The two MPP trackers are both resilient with 3,500 watts, so the blueplanet NX1 M2 series optimal for any roof geometry. The very wide design window of 100 V start voltage-80 V is also the lowest operating voltage-up to 580 V maximum DC voltage for easy planning. For operators, this means the greatest possible solar profit at any time of the day and every season.

Good equipment, easy to weight

With a weight of 11 kilograms and not even 38 centimeters of maximum expansion, the blueplanet NX1 M2 not only joy to the logistician, but also make installation easier. Appropriately, the cabling is carried out via the known Sunclix plugs, any special tools are not necessary.

Configuration and commissioning are quickly done via the easily understandable installation app, the customer then conveniently communicates with the inverter via WIFI. In operation, all devices of the NX1 M2 series work in whisper mode with only 25 dB with minimal self -consumption of below a watts.

Data sheet:
Data sheet...

Downloads:
Herstellergarantiebedingungen_KACO.pdf

[Tab: videos]Installation: Kaco Blueplanet 5.0 NX1 M2

Installation: Kaco Blueplanet 5.0 NX1 M2