
SMA SUNNY ISLAND 6.0H-12 Redundant SI6.0H-12 with Wi-Fi
Proven technology - now even more cost-effective
Worldwide is the world Sunny Iceland already installed more than 70,000 times. In the new generation, installers and plant operators benefit from an even more user-friendly battery inverter.
- Lower system costs due to fewer components
- Faster installation and commissioning by simple web interface
- Higher warranty life: 10 years
Communicative in all areas
Thanks to the integrated web interface and the standard interfaces WLAN and Ethernet, the Sunny Iceland now simply configure and monitor via smartphone or tablet.
- Standard interfaces Ethernet and WLAN use
- WebConnect for quick and easy plant monitoring with Sunny Portal / Sunny Places
- Local monitoring over the web interface
- Optimized Data Logging for maximum transparency even without permanent online access
Flexible for own homes and commercial enterprises
Whether in use in network remote areas or in private and commercial energy management: the Sunny Iceland is maximum flexible. He leaves planners for all the freedoms regarding the system size and type, the battery and the type of power generation. For self-consumption systems, replacement current systems and island systems.
- Retrofittable and modular expandable for single and three-phase systems from 1 to 30 kilowatts
- For all lead acid batteries and over 20 different Li-ion batteries
- Expandable with SMA Multicluster technology for systems from 20 to 300 kilowatts
Technical specifications | Sunny Iceland 6.0h | Sunny Iceland 8.0h | |
Operation on public network or generator | |||
Rated network voltage / AC voltage range | 230 V / 172.5 V to 264.5 V | 230 V / 172.5 V to 264.5 V | |
Rated network frequency / permissible frequency range | 50 Hz / 40 Hz to 70 Hz | 50 Hz / 40 Hz to 70 Hz | |
Maximum AC power for self-consumption optimization (network operation) | 20 a | 26 A | |
Maximum AC power for self-consumption optimization (mains operation) | 4.6 kVA | 6 kVA | |
Maximum AC input current | 50 a | 50 a | |
Maximum AC input power | 11500 W | 11500 W | |
Island operation or replacement current operation | |||
Rated network voltage / AC voltage range | 230 V / 202 V to 253 V | 230 V / 202 V to 253 V | |
Rated frequency / frequency range (adjustable) | 50 Hz / 45 Hz to 65 Hz | 50 Hz / 45 Hz to 65 Hz | |
Rated power (with UNOM, FNOM / 25 ° C / cos φ = 1) | 4600 W | 6000 W | |
AC power at 25 ° C for 30 min / 5 min / 3 sec | 6000 W / 6800 W / 11000 W | 8000 W / 9100 W / 11000 W | |
AC power at 45 ° C permanently | 3700 W | 5430 W | |
Rated current / maximum output current (peak) | 20 A / 120 A | 26 A / 120 A | |
Curescence factor output voltage / power factor in terms of measurement | <4% / -1 to +1 | <4% / -1 to +1 | |
DC input battery | |||
Rated input voltage / DC voltage range | 48 V / 41 V to 63 V | 48 V / 41 V to 63 V | |
Maximum battery charging current / DC rated load current / DC design unloading current | 110 A / 90 A / 103 A | 140 A / 115 A / 130 A | |
Battery type / battery capacity (area) | Li-ion *, FLA, VRLA / 100 AH to 10000 AH (lead) 50 AH to 10000 AH (Li-Ion) |
Li-ion *, FLA, VRLA / 100 AH to 10000 AH (lead) 50 AH to 10000 AH (Li-Ion) |
|
Load control | IUOU loading process with automatic full loading and compensation charge | ||
Efficiency / self-consumption of the device | |||
Maximum efficiency | 95,8 % | 95,8 % | |
Idle consumption / standby | 25.8 W / 6.5 W | 25.8 W / 6.5 W | |
Protection device (device) | |||
AC short circuit / AC overload | ● / ● | ● / ● | |
DC reverse polarity protection / DC backup | − / − | − / − | |
Overtemperature / Battery Beep Discharge | ● / ● | ● / ● | |
Overvoltage category according to IEC 60664-1 | Iii | Iii | |
General data | |||
Dimensions (B / H / T) | 467 mm / 612 mm / 242 mm (18.4 inch / 21.1 inch / 9.5 inches) | ||
Weight | 63 kg (138.9 lb) | ||
Operating temperature range | -25 ° C to +60 ° C (-13 ° F to +140 ° F) | ||
Protection class according to IEC 62103 | I | I | |
Climate class according to IEC 60721 | 3K6 | 3K6 | |
Degree of protection according to IEC 60529 | IP54 | IP54 | |
Equipment / function | |||
Wi-Fi, Speedwire / WebConnect / Si-Syscan (MultiCluster) | ● / ● / ○ | ● / ● / ○ | |
Operation & Display / Multifunction Relays | External via SRC-20/2 | ||
3-phase systems / replacement power function | ● / ● | ● / ● | |
Load condition calculation / full charge / compensation charge | ● / ● / ● | ● / ● / ● | |
Battery temperature sensor / communication lines | ● / ● | ● / ● | |
Certificates and approvals | WWW.SMA-Solar.com | WWW.SMA-Solar.com | |
Manufacturer's warranty 2): | 5 years | 5 years | |
For off-grid applications | |||
Automatic swivel dial / generator support | ● / ● | ● / ● | |
Parallel connection / multiplusters | ● / ● | ● / ● | |
Integrated soft start | ● | ● | |
accesories | |||
For off-grid applications | |||
Battery fuse ** | ○ | ○ | |
Interface Si-Comsma (RS485) / Si-Syscan (Multicluster) | ○ / ○ | ○ / ○ | |
Interface SWDMSi-10 (Speedwire) | ○ | ○ | |
Sunny Island Charger SIC50-MPT ** / SMA Cluster Controller | ○ / ○ | ○ / ○ | |
For on-grid applications | |||
Interface Si-Comsma (RS485) / Interface SWDMSi-10 (Speedwire) | ○ / ○ | ○ / ○ | |
Sunny Home Manager / SMA Energy meter / switching device for replacement current ** | ○ / ○ / ○ | ○ / ○ / ○ | |
● Series equipment ○ Optional - not available * See "List of approved lithium-ion batteries" at www.SMA-Solar.com ** Reference via external suppliers All specifications as of: October 2017 |
|||
Typical name | SI6.0H-12 | SI8.0H-12 |
2) The warranty conditions can be found under the tab Downloads
data sheet
Data sheet...
Downloads
Herstellergarantiebedingungen_SMA.pdf