SMA Surge protection for Core1 DC SPD-KIT4-10
Arrester Maximum Continuous Operating Voltage | - V |
Nominal discharge surge current (8/20) | - kA |
Protection Level Core/Earth | kV |
Signal-Maximum continuous voltage AC | - V |
Signal Rated Load Current | - A |
Signal-To-Protection Level Wire/Wire | kV |
With Remote Signaling Contact | no |
Rated load current | - A |
Protection Level Wire/Neutral Wire | kV |
Signal-Maximum continuous voltage DC | - V |
Signal-rated voltage AC | - V |
Signal-To-Protection Level Core/Earth | kV |
Mounting | - |
Rated voltage | - V |
Signal-To-Cutoff Frequency | MHz |
Signal Nominal Discharge Surge Current (8/20) | - kA |
Signal-rated voltage DC | - V |
Signalling at the device | visually |